Jump to content

Diary Complete New grower - first grow - Auto fem - full DIY


afternoon blazer
 Share

Recommended Posts

18 hours ago, afternoon blazer said:

What up Gromies. 

 

Just a small update.

 

Week 5. I think its day 30.

Switched to 100 percent nutez now from 75 percent in week 4.

Managed to squeeze in about 3 waterings in week 4. About 600ml or so each.

 

First 100 percent watering done today. Weather was shiiite this week so far. Fingers crossed. Better days ahead hopefully. Need that sun man.

Still getting about +-9 hours of direct sun. Stretching a small bit. But starting to form some nice budz.

Running without any issues still. Still touching wood too.

I think im happy overall.

Whats ur verdict?

20200818_121608.jpg

20200818_121631.jpg

20200818_121646.jpg

Looks great to me bro, well done

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Morning again fine people.

Update time.

This baby makes me smile everytime i look at it.

Week 8 - Day 60.

No training. No defoil.

Nutez from start of week 4.

8 liter pot.

24 hour light until week 5 ( 9 hours of sun from week 2 and the rest was LED floodlight. From week 5 to current, about 10 hours of sunlight only.

She stands about 40cm tall.

Probably flush at the start of week 9.

Trichz are mostly cloudy.

 

Theres some rotational shots.

20200909_080536.jpg

20200909_080544.jpg

20200909_080548.jpg

20200909_080603.jpg

20200909_080638.jpg

15996337748147903007180188979882.jpg

  • Like 6
Link to comment
Share on other sites

2 minutes ago, afternoon blazer said:

Morning again fine people.

Update time.

This baby makes me smile everytime i look at it.

Week 8 - Day 60.

No training. No defoil.

Nutez from start of week 4.

8 liter pot.

24 hour light until week 5 ( 9 hours of sun from week 2 and the rest was LED floodlight. From week 5 to current, about 10 hours of sunlight only.

She stands about 40cm tall.

Probably flush at the start of week 9.

Trichz are mostly cloudy.

 

Theres some rotational shots.

20200909_080536.jpg

20200909_080544.jpg

20200909_080548.jpg

20200909_080603.jpg

20200909_080638.jpg

15996337748147903007180188979882.jpg

The smoke looks like its going to be tasty AF! 

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

What up good people. 

So update time.

About day 74. Harvested last night. After 48 hours of darkness. No water last 3 days and a 7 day flush.

 

Didnt have a scale. So didnt way it up.

But trimed up and drying now.

 

I got an extraction fan that i can install. But dont think i need it just yet. 

 

I will weigh it after drying though. 

20200923_231416.jpg

20200923_231437.jpg

20200923_231453.jpg

20200923_214312.jpg

20200923_214347.jpg

20200924_185801.jpg

  • Like 9
Link to comment
Share on other sites

  • 2 weeks later...

Howzit fine people.

 

So 2 more days for a 2 week cure to be completed.

Final cured weight is 13g

Did a small sample last night.

Smooth smoke.

Not the strongest i have smoked. But packs a solid head high punch.

Scent is along the lines of lime and sweet.

 

After drying i had it in a jar with a 62 boveda. Burping every 2nd day.

After a week i put in the 58 boveda.

Really happy with the end product.

The yield was abit low. But the plant details state its a low yielder. Also considering my lighting and it was the first Auto - cant really complain much.

 

Thank you to everyone who had a input, suggestion, advise, tips and direction.

Only getting better. 🙌

 

Pic of the sampled head below.

20201003_074359.jpg

20201003_074408.jpg

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By Gjack
      Hi! I'm new here. Please help me to feel more comfortable at this place. Recently i owned a little farm. As I was tending to the vegetables in the garden, I got the idea to plant some marijuana for my own use. The biggest problem is that I live in a country where it is illegal. So I'm open to talking about this topic, share your experience. It will be very interesting for me. Thank you in advance.
    • By Johnsmithled
      This is how I built an overpowered light worth $2500+ on the market for only $850. All currency is CAD.

      *BEFORE STARTING*
      Watch the 6 part growmau5 series to learn the wiring:
       
      For the grounding plug:
       
      Technical:

      4x Hlg 185H 700ma in series drivers (i suggest you buy the newer 240H model) $250

      40x 5000K $350

      7x 3000K $25
      (You can use less I used way too many)

      All are bridgelux Gen 3/ C3 (Make sure theyre all plug in only dont mess around with the solder ones unless you have 100+hours experience in soldering)
      The 3000k ones I used were soulder onlys. Lost a couple due to human error

      Total Cost (TC): $575

      Frame:
      (Choose a better material for frame, I used wood composite because I was lazy) (I would think aluminum would be the best material but all have their pros and cons)

      Wood composite 2x2ft v

      Matching plastic 2x2ft (painting frame) $50?

      Thermal tape (sized to the width of the led bars) $20

      TC: $70-100

      Electric:

      100’ length 20guage solid core wire $60

      50 pack 2 wire wagos 221 $25

      4x plastic junction boxes 4inch x 4inch x 3inch (make sure it comes with something to plug up the holes and hold the wire)$40

      500 assorted pack heatshrink tubing $20 (good to help fit in junction box)

      4x Leviton 515PV 15Amp 125Volt grounding plug $20

      25’ 16guage wire (for the grounding plug) $20

      TC:$165-Everything is super flexible here just make sure your amps and volt calculations are solid.
      -Dedicated extra fans (required): With 2 medium fans running on the light, and another 2 small fans running on the drivers everything is 20C-25C.

      SETTING UP THE DIMMERS

      (Very easy if you do it like i did in these pictures)

      All you need is:
      •100k potentiometers (maybe an ohm meter if you want to make sure ur dimmers go all the way to 100, most dont they go to like 92 or 97)

      •20 guage wire (same as the led strips)

      •Plastic junction box (make sure its got rubber wire holders that you cut a hole through with scissors and put the wire/ potentiometer through)

      •211 Wago wire connector

      •soldering machine (temperature is dependant on what kind of solder you use) $25

      • silver solder (find a lower temp soldering machine ~360f for silver) $20
      (This light is truly 800w if you use the exact parts, if you use more or less drivers and led strips or different brands then the wattage can vary from 600-1000, materials are very flexible just try to make sure volt/amp calculations are correct) (Always be cautious with electricity, build this whole thing without being plugged in to any wall outlet/power source⚠️⚡️)









    • By AfrikaansePotkop
      Hi everyone, 
      I am currently looking to purchase an indoor setup for myself. Nothing fancy or big. Just enough to be a new hobby. I am always willing to invest in more stuff later, just dont have the money right now.
      So basically my budget is Around R5k. I am willing to go over, but anything lower is always preferred.
      I got a quote form MarijuanaSA and want a few opinions on it, or just a whole new quote for those that are willing to make one.

      It seems to have all the important items in it. I can buy a few items that do the same at lower prices, like on takealot. I am looking at 0.8x0.8 or a 1x1 tents. What would be better? I want to grow around 2 to 3 plants at a time.
      Then, I would really like a cheaper light to use but just cant seem to find a good option that is less than 1k...
       
      So basically, I am asking for assistance in selecting all the basic items for my first ever indoor grow. Whatever saves me the most money and gives me enough items to get away for at least 2 harvests before investing more.
      I already have soil and pots from my outdoor plants.
      Any help will really be appreciated as I barely know what I am buying with indoor growing equipment.
       
      I have a small list of just a few items that I am putting together to use as a purchasing guide. Here it is for a general idea of what im currently looking at:
       
    • By Martin7318
      Started with a few seeds around 2 weeks ago, 4 of them. All bag seed.
      Along with a bunch of equipment, I received 3 fresh seedlings of In-House genetics "Deluxe Sugarcane".
      All 7 seedlings currently under 1 x QB-75 from GrowOpz (32cm above tallest plant), 18/6 cycle in the tent.
      Soil being used is called "420 Mix" by 3Sixty.
      Only feeding I have done was for the soil - Biodyne Environoc 1ml/L given for the first time with last watering. Pots seem to be holding water for 2/3 days at a time.
       
      I'll post the back log of photo's here, the 3 bigger girls in the middle are the Deluxe seeds, the other 4 are mystery seeds.
       
      Please comment, good, bad, happy, sad, all welcome. I'm a fast learner and eager to learn, I look forward to it!
       

      (Picture taken Yesterday 10/08)
    • By Budwizer
      These are my DIY QB lights
      I can run them full power with no issues. Quite expensive to build, but I like the reliability of passive cooling.
       






×
×
  • Create New...