DesignatedDave

So I've never had a bad clone from cannaclone.co.za Up until this last order of Apple Blossom Clones, I've never had an issue with cannacut.co.za clones (30 odd clones ordered in total) What did however bother me, was Cannacut's response to me bringing the PM to their attention: Yeah...so... lets not do that... I pretty much did a similar "bathing" technique of these Apple Blossom clones, but with 2% hydrogen peroxide, then just a continual weekly treatment of AQ-SF. However I must say that I fucking hate growing from seeds... germinating seeds is my handicap in growing cannabis. I just went through R4000's worth of seeds (Humbolt Blueberry miffin and Humbolt Hella Jelly) and I can only get them to go as far as pushing the Cotyledons up out the seed and then they just fucking die. I am terrible at germinating them, but that's ok, I'm ok with it, because on the other hand, when I have successfully grown from seed, my OCD does not like the same strain, but different Pheno's in the same tent... my meds are not nearly strong enough to deal with that shit. I much prefer growing from clones every single time and I have no problem paying for good clones with good genetics. Clones cut a full month off of the veg time, from seed you need like 60 days veg before flowering, from clone it's at the same point in 30 days, then flip, giving essentially 4 indoor grow cycles a year. I also like the consistency of growing 4 of the exact same plant each time, its OCD friendly I would rather pay someone who is good at their skills of growing from seed to clone, than me stumbling around like a duck with a rake wasting shittons of money on seeds that just die in my hands. Yeah sure there are the risks of getting bad clones or ones with PM, but statistically, I've only had 4 clones with PM out of 40 odd clones I've ordered, that's a 90% success rate vs my 0% germination rate.

Finally got an order confirmation this morning and a note that they busy with it, looks promising, now lets see if the clones actually get sent to me.

You would think so right... I ordered 5 clones yesterday and paid for them. I haven't received any order confirmation, the order still says payment outstanding on their site and I emailed them the proof of payment (snapscan screenshot) and they haven't responded to me... So lets give it a few more days and I will update this thread as to whether they are scammers who have taken my R1000 or if they legit.... so far not looking good with zero commmunication. cannacuts.co.za is closed - not suprised though, the last clones I got from them came compliments with PM on them. cannaclone.co.za also now seems closed.

Its never left residue because it sprays out a mist of disinfectant and doesn't work like a traditional fogger like you thinking of. I've used the builders one with success, but the two I prefer is this one from Makro - https://www.makro.co.za/health-beauty/bath-shower/shower-gel-hand-wash/liquid-soap/liquid-clinic-room-fogger-aerosol---400ml/p/fc555657-8557-45a4-8774-3352f40bd634?gclid=CjwKCAjwivemBhBhEiwAJxNWN35Oc1GfUytNWZ4Q8EGvfihDwOPTDkRYZoNWSXcro4nsD2KgewOtPhoC7oUQAvD_BwE and this one from leeroy merlin - https://leroymerlin.co.za/disinfectant-fogger-infectiguard-400ml-81456871?sfdr_ptcid=32806_617_654584217&sfdr_hash=4d08f89ebf663d59850466db71a0878b&gclid=CjwKCAjwivemBhBhEiwAJxNWN3j6Amfsb72SrmBPwf1BQ9HuhzWUgVeNEdnJSyTkywWHnUK4EGw04RoCMXkQAvD_BwE After 10 minutes of it going off, you turn your extractor on and after another 5min, you can wipe the walls of the tent (they will have small droplets from the mist spray itself). I only vacuum the floor of the tent, the rest I just quickly go over with a water and a cloth, never had an issue and its a quick an easy to disinfect literally everything, the grow light, the fans, the extractor, it gets everywhere.

Personally, I think your best shot is to strip all the leaves with PM to open up and really get airflow around your plants, then mix up 2% hydrogen peroxide and spray down the entire plant, a week later, mix up 1% and spray down the plant again. At least with this you don’t have to worry about getting spray on the budsites. The slightly more extreme option is to mix up potassium bicarbonate and water, kills PM instantly, but can be aggressive on the plant. failing that, toss the entire grow, it’s not going to be worth keeping. as for cleaning your tent, the thing I found works the best and easiest is a disinfectant fogger can. Turn your extractor off, set it off in the middle of your tent floor and zip it up. After 10min, put your extractor on. Then after that, just wipe the inside of your tent down with a cloth and some water.

OK Tent number 2 is sporting some clones of Apple Blossom From Humboldt Seed Company (https://humboldtseedcompany.com/appleblossom/) - clones also from cannacuts.co.za Also being feed Tri-part, Kushy Amino and Orthosilicic Acid - I have one extra clone that I'm not entire sure what to do with yet... In this grow, the front two autopots are using a larger air pump than the back two. I want to see if the size of the air pump makes a difference in the growth of the plant.

Background: After Eskom's Stage 6 load shedding decided to have one to many parties in my grow room, my last diary (https://www.420sa.co.za/topic/7289-dear-diary/) ended in a Powdery Mildew fiesta and a very unhappy Dave. From that, I learned a lot and decided to tear down everything in the grow room and rather convert it into a lung room with two grow tents. The isolation of the plants in each tent make IPM and environment controlling far easier. I replaced the 4 lead acid batteries in my inverter with 4 lithium ion batteries. I invested in a Solenco CF8608 HEPA air purifier which now runs 24x7 in the lung room, It removes the PM spores and touch wood, so far so good. I'm a little into this grow now (week 4/5 of flower) and I am growing 4 clones of Cherry Gar-See-Ya from Ethos Generics. The clones come from cannacuts.co.za Grown in Autopots and Feeding Terra Aquatica Tri-Part, with Kusky Amino, Orthosilicic Acid (https://hydroponic.co.za/hydroponics/eckosil-silicon-supplement/) on every feed, I also add the odd dose of CalMag for giggles every now and then. For this grow in particular, I'm trying a sterile technique which will make any Organic grower rage quit the internet, every 2nd week I add hydrogen peroxide to the nutrient solution to a concentration of 1%. There is method in this style in that it stimulates root hairs. That's that grow for now.

I use TA Tripart with my grow and in all honesty I have stuck mostly to the exact quantity it specifies on the bottles. But first a disclaimer, I don't grow autos because they cost more in electricity to grow than photoperiods do, so I don't see the point to it, plus I prefer the control I have over photoperiods and I prefer the hardiness of a photoperiod over an auto. In saying that, once I have mixes the nutrient solution and added Orthosilicic Acid, Amino Acids (and sometimes a little extra calmag because I grow in coco coir), I come out at about 2.2EC during veg and 2.8EC during flower. I've even fed upwards of 3.2 EC to my plants and they been fine and healthy, I haven't encountered nutrient burn yet with the TA nutrients. I even feed my new clones I buy at 2.4EC right from the start, you really do have a lot of a breathing room with TA nutrients. How strong or how weak you feed your plants is going depend on the genetics of the plant you growing. Some genetics are happy to grown and produce decent bud on 1.4EC all the way through growth, other genetics you can literally throw the TA bottles at them and they just take it like car wash girls on a hot day. Don't get to caught up on the EC values though, rather look at the plant and see how its responding to your nutrients: - Is the leaves the right kind of healthy green or are they too light or to dark green (too little or too nitrogen)? - Are the tips of the leaves healthy or are they crisping up at all (healthy vs to much nutrients)? - Are the leaves praying or dropping? - Is the plant growing at a steady growth rate or has it slowed? (healthy roots vs a root problem) - Are there any spots or strange colours on the leaves ( nutrient deficiencies or toxicities) The leaves of the plant will tell you whether or not to increase your EC, decrease it, or leave it alone because the plants are happy.

They looking awesome, how you managing the temperatures and humidity in their?

The sativa / indica being daytime / night time also depends a lot of when the plant is harvested. For example, if you take a sativa that say matures in 8 weeks and harvest it around 10 weeks when you have mostly amber trichomes, you will have a couch locked, make you relax and sleepy sativa plant. If you harvest an indica a little early when there is only milky trichomes and hardly no amber ones, you will have a nice cerebral awake high from a indica plant. Knowing this you can play with strains, for example, if you take a heavy sativa like a Sour Diesel, leave it for an extra week or 2 before harvest until those trichomes amber up nicely, you will end up with a really mellow Sour Diesel that's actually awesome. "Makes you feel like it wants to give you energy, but maybe later..."

I doubt you will find it locally here and will probably have to order seeds from over the seas.

For CBD I always recommend: Dutch Passion's Charlotte's Angel - https://marijuanasa.co.za/product/charlottes-angel-cbd/ Dr Seedsman 30:1 CBD - https://groenseeds.com/product/doctor-seedsman-cbd-301-3-seeds-feminised/ Seedsman CBD 30:1 Pink Kush Auto - https://groenseeds.com/product/pink-kush-cbd-301-3-seeds-auto/

they really look like they loving life at the moment.

Freedom Farms Coco-Perlite is already washed and buffered, you don't need to buffer it or worry about that, you bought the right stuff However, when growing with Coco Coir, you need to remember that the coco, over time is going to be constantly be competing for magnesium with your plant, its just the nature of the medium and you just manage it with some calmag. I like to give my plants in coco coir/perlite 1ml / 1L of Terra Aquatica Cal Mag once per week just to maintain the "buffer" of the coco coir. If there is a bit of deficiency like you seeing, you could give Calmag twice a week at 1.5ml/1L for 2 weeks until you see the new growth is looking good. However, looking at your pictures, I would have said that your nitrogen seems a bit low, what nutrients are you using and at what quantities?

Download the Photone app for your phone and use white paper and tape for the diffuser. This measures PPFD, LUX, DLI, etc and its pretty damn accurate.

Go Mars over the budbox.

No idea about them, but I'm really tempted to try their grow their Berry Mclovin - https://www.cannabisseeds.co.za/store/feminised/renegade-seed-co-berry-mclovin

I am so jealous of that greenhouse, I been eyeing them out for a while now, they really awesome, interesting you mention that about the heat, my plastic tunnel was like that. what you need is a door on the front and back so air can move through it

I've ordered 8 to try out, I think I'll prefer them to the pebbles, I hate those pebbles and I'm convinced they fuck with the PH levels of the nutrients in trays / root zone. Are you considering selling your autopots or are you just hypothetically saying?

@Ill_Evan - Have you seen the new autopot airbases so that you don't need to use the pebbles anymore - https://hydroponic.co.za/hydroponics/autopot-airbase-square/

Green Houston has what you looking for : https://www.greenhouston.co.za/products/humic-acid https://www.greenhouston.co.za/products/fulvic-acid https://www.greenhouston.co.za/products/kelpak

So... my outdoor plants have mostly survived this season. The PM has been at them, but I been using AQ-SF on them and it seems to have the PM completely under control. My Acid Dough: Mandarin Cookies: Chempie x Purple Punch: Planet of the grapes: Zombie Kush is taking it's time:

That's really awesome, using that would make me feel like I walked out of Hogwarts as Harry Potthead...

Not having any reference to what the fuck you talking about, I'm gonna say that this looks like drunk posting.

All remaining plants have ended up getting Powdery Mildew and I've had to throw away the entire grow away. Pretty disappointing, this Eskom load shedding has completely fucked this grow up.